The Camos BTS headsets can be paired together on channel 2 for full duplex intercom. The intercom is voice activated and will override any A2DP source paired to channel 1. Once you have completed the procedure below the units will automatically connect.
01 On the first unit, hold the M button on the bottom of the unit.
02 While holding the M button down, hold the plus (+) button for 7 seconds, the green LED will begin to blink rapidly.(It is important to make sure the M button is held down the whole 7 seconds)
03 Take the second unit and hold the plus button (+) button for 7 seconds until the green LED begins to blink rapidly.
04 At this point the green LED on both units should be flashing 2 times every second which means the units are paired and the intercom is active.
Notes:- If there is no voice activity detected for 10 seconds the intercom goes into standby and needs to be reactivated by speaking into the microphone.
- When the units are power cycled or drop out of intercom range they will go into search mode for it's intercom partner (indicated by rapidly blinking light) and will reconnect when the partner unit is within intercom range or powered on.